File: //proc/thread-self/root/root/.cpanm/build.log
cpanm (App::cpanminus) 1.9019 on perl 5.032001 built for x86_64-linux-thread-multi
Work directory is /root/.cpanm/work/1752651929.61455
You have make /bin/make
You have /bin/curl: curl 7.76.1 (x86_64-redhat-linux-gnu) libcurl/7.76.1 OpenSSL/3.2.2 zlib/1.2.11 brotli/1.0.9 libidn2/2.3.0 libpsl/0.21.1 (+libidn2/2.3.0) libssh/0.10.4/openssl/zlib nghttp2/1.43.0
You have /bin/tar: tar (GNU tar) 1.34
Copyright (C) 2021 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by John Gilmore and Jay Fenlason.
You have /bin/unzip
Searching CPAN () on cpanmetadb ...
--> Working on CPAN
Fetching http://www.cpan.org/authors/id/A/AN/ANDK/CPAN-2.38.tar.gz
-> OK
Unpacking CPAN-2.38.tar.gz
Entering CPAN-2.38
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.60)
Configuring CPAN-2.38
Running Makefile.PL
Importing PAUSE public key into your GnuPG keychain... done!
(You may wish to trust it locally with 'gpg --lsign-key 2E66557AB97C19C791AF8E20328DA867450F89EC')
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for CPAN
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have CPAN::Meta 0 ... Yes (2.150010)
Checking if you have CPAN::Meta::Requirements 2.121 ... Yes (2.140)
Checking if you have Socket 0 ... Yes (2.031)
Checking if you have CPAN::Meta::YAML 0 ... Yes (0.018)
Checking if you have File::Spec 0 ... Yes (3.78)
Checking if you have MIME::Base64 0 ... Yes (3.16)
Checking if you have Archive::Zip 0 ... Yes (1.68)
Checking if you have Digest::SHA 0 ... Yes (6.02)
Checking if you have Text::Wrap 0 ... Yes (2013.0523)
Checking if you have Net::Ping 0 ... Yes (2.74)
Checking if you have Data::Dumper 0 ... Yes (2.174)
Checking if you have Compress::Zlib 0 ... Yes (2.102)
Checking if you have File::Temp 0 ... Yes (0.2311)
Checking if you have Exporter 0 ... Yes (5.74)
Checking if you have Module::Build 0 ... Yes (0.4231)
Checking if you have ExtUtils::CBuilder 0 ... Yes (0.280236)
Checking if you have Archive::Tar 0 ... Yes (2.38)
Checking if you have File::HomeDir 0 ... Yes (1.006)
Checking if you have Text::Glob 0 ... Yes (0.11)
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.60)
Checking if you have File::Which 0 ... Yes (1.23)
Checking if you have Pod::Perldoc::ToMan 0 ... Yes (3.28)
Checking if you have Exporter::Heavy 0 ... Yes (5.72)
Checking if you have Term::ReadKey 0 ... Yes (2.38)
Checking if you have Digest::MD5 0 ... Yes (2.58)
Checking if you have File::Copy 0 ... Yes (2.34)
Checking if you have Test::Harness 2.62 ... Yes (3.42)
Checking if you have Parse::CPAN::Meta 0 ... Yes (2.150010)
Checking if you have Compress::Bzip2 0 ... Yes (2.28)
Checking if you have Test::More 0 ... Yes (1.302183)
Checking if you have JSON::PP 0 ... Yes (4.06)
Checking if you have IO::Compress::Base 0 ... Yes (2.102)
Checking if you have Text::ParseWords 0 ... Yes (3.30)
Checking if you have Pod::Perldoc 0 ... Yes (3.2801)
Checking if you have Net::FTP 0 ... Yes (3.13)
Checking if you have Module::Signature 0 ... Yes (0.88)
Checking if you have HTTP::Tiny 0.005 ... Yes (0.076)
Checking if you have Scalar::Util 0 ... Yes (1.56)
Checking if you have IO::Zlib 0 ... Yes (1.11)
Building CPAN-2.38
cp lib/CPAN/Version.pm blib/lib/CPAN/Version.pm
cp lib/CPAN/Plugin.pm blib/lib/CPAN/Plugin.pm
cp lib/CPAN/Index.pm blib/lib/CPAN/Index.pm
cp lib/CPAN/Queue.pm blib/lib/CPAN/Queue.pm
cp lib/CPAN/Distrostatus.pm blib/lib/CPAN/Distrostatus.pm
cp lib/CPAN/FirstTime.pm blib/lib/CPAN/FirstTime.pm
cp lib/CPAN/Prompt.pm blib/lib/CPAN/Prompt.pm
cp lib/App/Cpan.pm blib/lib/App/Cpan.pm
cp lib/CPAN/Bundle.pm blib/lib/CPAN/Bundle.pm
cp lib/CPAN/Debug.pm blib/lib/CPAN/Debug.pm
cp lib/CPAN/Exception/yaml_process_error.pm blib/lib/CPAN/Exception/yaml_process_error.pm
cp lib/CPAN.pm blib/lib/CPAN.pm
cp lib/CPAN/HandleConfig.pm blib/lib/CPAN/HandleConfig.pm
cp lib/CPAN/Shell.pm blib/lib/CPAN/Shell.pm
cp lib/CPAN/Mirrors.pm blib/lib/CPAN/Mirrors.pm
cp lib/CPAN/Admin.pm blib/lib/CPAN/Admin.pm
cp lib/CPAN/InfoObj.pm blib/lib/CPAN/InfoObj.pm
cp lib/CPAN/FTP/netrc.pm blib/lib/CPAN/FTP/netrc.pm
cp lib/CPAN/Kwalify/distroprefs.yml blib/lib/CPAN/Kwalify/distroprefs.yml
cp lib/CPAN/Kwalify/distroprefs.dd blib/lib/CPAN/Kwalify/distroprefs.dd
cp lib/CPAN/Nox.pm blib/lib/CPAN/Nox.pm
cp lib/CPAN/URL.pm blib/lib/CPAN/URL.pm
cp lib/CPAN/Exception/blocked_urllist.pm blib/lib/CPAN/Exception/blocked_urllist.pm
cp lib/CPAN/Distribution.pm blib/lib/CPAN/Distribution.pm
cp lib/CPAN/CacheMgr.pm blib/lib/CPAN/CacheMgr.pm
cp lib/CPAN/HTTP/Credentials.pm blib/lib/CPAN/HTTP/Credentials.pm
cp lib/CPAN/Complete.pm blib/lib/CPAN/Complete.pm
cp lib/CPAN/HTTP/Client.pm blib/lib/CPAN/HTTP/Client.pm
cp lib/CPAN/Author.pm blib/lib/CPAN/Author.pm
cp lib/CPAN/Module.pm blib/lib/CPAN/Module.pm
cp lib/CPAN/Exception/RecursiveDependency.pm blib/lib/CPAN/Exception/RecursiveDependency.pm
cp lib/CPAN/Tarzip.pm blib/lib/CPAN/Tarzip.pm
cp lib/CPAN/Plugin/Specfile.pm blib/lib/CPAN/Plugin/Specfile.pm
cp lib/CPAN/LWP/UserAgent.pm blib/lib/CPAN/LWP/UserAgent.pm
cp lib/CPAN/API/HOWTO.pod blib/lib/CPAN/API/HOWTO.pod
cp lib/CPAN/Distroprefs.pm blib/lib/CPAN/Distroprefs.pm
cp lib/CPAN/DeferredCode.pm blib/lib/CPAN/DeferredCode.pm
cp lib/CPAN/Exception/yaml_not_installed.pm blib/lib/CPAN/Exception/yaml_not_installed.pm
cp lib/CPAN/FTP.pm blib/lib/CPAN/FTP.pm
cp lib/CPAN/Kwalify.pm blib/lib/CPAN/Kwalify.pm
cp scripts/cpan blib/script/cpan
"/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/cpan
cp scripts/cpan-mirrors blib/script/cpan-mirrors
"/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/cpan-mirrors
Manifying 2 pod documents
Manifying 16 pod documents
Manifying 2 pod documents
Manifying 16 pod documents
Installing /usr/local/share/perl5/5.32/CPAN.pm
Installing /usr/local/share/perl5/5.32/CPAN/Version.pm
Installing /usr/local/share/perl5/5.32/CPAN/Plugin.pm
Installing /usr/local/share/perl5/5.32/CPAN/Index.pm
Installing /usr/local/share/perl5/5.32/CPAN/Queue.pm
Installing /usr/local/share/perl5/5.32/CPAN/Distrostatus.pm
Installing /usr/local/share/perl5/5.32/CPAN/FirstTime.pm
Installing /usr/local/share/perl5/5.32/CPAN/Prompt.pm
Installing /usr/local/share/perl5/5.32/CPAN/Bundle.pm
Installing /usr/local/share/perl5/5.32/CPAN/Debug.pm
Installing /usr/local/share/perl5/5.32/CPAN/HandleConfig.pm
Installing /usr/local/share/perl5/5.32/CPAN/Shell.pm
Installing /usr/local/share/perl5/5.32/CPAN/Mirrors.pm
Installing /usr/local/share/perl5/5.32/CPAN/Admin.pm
Installing /usr/local/share/perl5/5.32/CPAN/InfoObj.pm
Installing /usr/local/share/perl5/5.32/CPAN/Nox.pm
Installing /usr/local/share/perl5/5.32/CPAN/URL.pm
Installing /usr/local/share/perl5/5.32/CPAN/Distribution.pm
Installing /usr/local/share/perl5/5.32/CPAN/CacheMgr.pm
Installing /usr/local/share/perl5/5.32/CPAN/Complete.pm
Installing /usr/local/share/perl5/5.32/CPAN/Author.pm
Installing /usr/local/share/perl5/5.32/CPAN/Module.pm
Installing /usr/local/share/perl5/5.32/CPAN/Tarzip.pm
Installing /usr/local/share/perl5/5.32/CPAN/Distroprefs.pm
Installing /usr/local/share/perl5/5.32/CPAN/DeferredCode.pm
Installing /usr/local/share/perl5/5.32/CPAN/FTP.pm
Installing /usr/local/share/perl5/5.32/CPAN/Kwalify.pm
Installing /usr/local/share/perl5/5.32/CPAN/Exception/yaml_process_error.pm
Installing /usr/local/share/perl5/5.32/CPAN/Exception/blocked_urllist.pm
Installing /usr/local/share/perl5/5.32/CPAN/Exception/RecursiveDependency.pm
Installing /usr/local/share/perl5/5.32/CPAN/Exception/yaml_not_installed.pm
Installing /usr/local/share/perl5/5.32/CPAN/FTP/netrc.pm
Installing /usr/local/share/perl5/5.32/CPAN/Kwalify/distroprefs.yml
Installing /usr/local/share/perl5/5.32/CPAN/Kwalify/distroprefs.dd
Installing /usr/local/share/perl5/5.32/CPAN/HTTP/Credentials.pm
Installing /usr/local/share/perl5/5.32/CPAN/HTTP/Client.pm
Installing /usr/local/share/perl5/5.32/CPAN/Plugin/Specfile.pm
Installing /usr/local/share/perl5/5.32/CPAN/LWP/UserAgent.pm
Installing /usr/local/share/perl5/5.32/CPAN/API/HOWTO.pod
Installing /usr/local/share/perl5/5.32/App/Cpan.pm
Installing /usr/local/share/man/man1/cpan.1
Installing /usr/local/share/man/man1/cpan-mirrors.1
Installing /usr/local/share/man/man3/App::Cpan.3pm
Installing /usr/local/share/man/man3/CPAN.3pm
Installing /usr/local/share/man/man3/CPAN::API::HOWTO.3pm
Installing /usr/local/share/man/man3/CPAN::Admin.3pm
Installing /usr/local/share/man/man3/CPAN::Debug.3pm
Installing /usr/local/share/man/man3/CPAN::Distroprefs.3pm
Installing /usr/local/share/man/man3/CPAN::FirstTime.3pm
Installing /usr/local/share/man/man3/CPAN::HandleConfig.3pm
Installing /usr/local/share/man/man3/CPAN::Kwalify.3pm
Installing /usr/local/share/man/man3/CPAN::Mirrors.3pm
Installing /usr/local/share/man/man3/CPAN::Nox.3pm
Installing /usr/local/share/man/man3/CPAN::Plugin.3pm
Installing /usr/local/share/man/man3/CPAN::Plugin::Specfile.3pm
Installing /usr/local/share/man/man3/CPAN::Queue.3pm
Installing /usr/local/share/man/man3/CPAN::Tarzip.3pm
Installing /usr/local/share/man/man3/CPAN::Version.3pm
Installing /usr/local/bin/cpan
Installing /usr/local/bin/cpan-mirrors
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed CPAN-2.38 (upgraded from 2.29)
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/CPAN-2.38/install.json
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/CPAN-2.38/MYMETA.json
Searching CPAN::Meta::Requirements () on cpanmetadb ...
--> Working on CPAN::Meta::Requirements
Fetching http://www.cpan.org/authors/id/R/RJ/RJBS/CPAN-Meta-Requirements-2.143.tar.gz
-> OK
Unpacking CPAN-Meta-Requirements-2.143.tar.gz
Entering CPAN-Meta-Requirements-2.143
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.60)
Configuring CPAN-Meta-Requirements-2.143
Running Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for CPAN::Meta::Requirements
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have B 0 ... Yes (1.80)
Checking if you have version 0.88 ... Yes (0.9928)
Checking if you have Carp 0 ... Yes (1.50)
Checking if you have strict 0 ... Yes (1.11)
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.60)
Checking if you have warnings 0 ... Yes (1.47)
Building CPAN-Meta-Requirements-2.143
cp lib/CPAN/Meta/Requirements/Range.pm blib/lib/CPAN/Meta/Requirements/Range.pm
cp lib/CPAN/Meta/Requirements.pm blib/lib/CPAN/Meta/Requirements.pm
Manifying 2 pod documents
Manifying 2 pod documents
Installing /usr/local/share/perl5/5.32/CPAN/Meta/Requirements.pm
Installing /usr/local/share/perl5/5.32/CPAN/Meta/Requirements/Range.pm
Installing /usr/local/share/man/man3/CPAN::Meta::Requirements.3pm
Installing /usr/local/share/man/man3/CPAN::Meta::Requirements::Range.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed CPAN-Meta-Requirements-2.143 (upgraded from 2.140)
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/CPAN-Meta-Requirements-2.143/install.json
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/CPAN-Meta-Requirements-2.143/MYMETA.json
Searching CPAN::Meta::YAML () on cpanmetadb ...
--> Working on CPAN::Meta::YAML
Fetching http://www.cpan.org/authors/id/E/ET/ETHER/CPAN-Meta-YAML-0.020.tar.gz
-> OK
Unpacking CPAN-Meta-YAML-0.020.tar.gz
Entering CPAN-Meta-YAML-0.020
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.60)
Configuring CPAN-Meta-YAML-0.020
Running Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for CPAN::Meta::YAML
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have Exporter 0 ... Yes (5.74)
Checking if you have Scalar::Util 0 ... Yes (1.56)
Checking if you have Fcntl 0 ... Yes (1.13)
Checking if you have B 0 ... Yes (1.80)
Checking if you have strict 0 ... Yes (1.11)
Checking if you have Carp 0 ... Yes (1.50)
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.60)
Checking if you have warnings 0 ... Yes (1.47)
Building CPAN-Meta-YAML-0.020
cp lib/CPAN/Meta/YAML.pm blib/lib/CPAN/Meta/YAML.pm
Manifying 1 pod document
Manifying 1 pod document
Installing /usr/local/share/perl5/5.32/CPAN/Meta/YAML.pm
Installing /usr/local/share/man/man3/CPAN::Meta::YAML.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed CPAN-Meta-YAML-0.020 (upgraded from 0.018)
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/CPAN-Meta-YAML-0.020/install.json
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/CPAN-Meta-YAML-0.020/MYMETA.json
Searching Expect () on cpanmetadb ...
--> Working on Expect
Fetching http://www.cpan.org/authors/id/J/JA/JACOBY/Expect-1.38.tar.gz
-> OK
Unpacking Expect-1.38.tar.gz
Entering Expect-1.38
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.64 ... Yes (7.60)
Configuring Expect-1.38
Running Makefile.PL
Warning: prerequisite IO::Pty 1.11 not found.
Warning: prerequisite IO::Tty 1.11 not found.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Expect
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have IO::Pty 1.11 ... No
Checking if you have Fcntl 0 ... Yes (1.13)
Checking if you have Exporter 0 ... Yes (5.74)
Checking if you have IO::Tty 1.11 ... No
Checking if you have POSIX 0 ... Yes (1.94)
Checking if you have IO::Handle 0 ... Yes (1.42)
Checking if you have Errno 0 ... Yes (1.30)
Checking if you have Carp 0 ... Yes (1.50)
==> Found dependencies: IO::Pty, IO::Tty
Searching IO::Pty (1.11) on cpanmetadb ...
--> Working on IO::Pty
Fetching http://www.cpan.org/authors/id/T/TO/TODDR/IO-Tty-1.20.tar.gz
-> OK
Unpacking IO-Tty-1.20.tar.gz
Entering IO-Tty-1.20
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.60)
Configuring IO-Tty-1.20
Running Makefile.PL
Now let's see what we can find out about your system
(logfiles of failing tests are available in the conf/ dir)...
Looking for _getpty()...... not found.
Looking for getpt()........ FOUND.
Looking for grantpt()...... FOUND.
Looking for openpty()...... FOUND.
Looking for posix_openpt(). FOUND.
Looking for ptsname()...... FOUND.
Looking for ptsname_r().... FOUND.
Looking for sigaction().... FOUND.
Looking for strlcpy()...... not found.
Looking for ttyname()...... FOUND.
Looking for unlockpt()..... FOUND.
Looking for libutil.h...... not found.
Looking for pty.h.......... FOUND.
Looking for sys/pty.h...... not found.
Looking for sys/ptyio.h.... not found.
Looking for sys/stropts.h.. not found.
Looking for termio.h....... FOUND.
Looking for termios.h...... FOUND.
Looking for util.h......... not found.
Checking which symbols compile OK...
(sorry for the tedious check, but some systems have not too clean
header files, to say the least; '+' means OK, '-' means not defined
and '*' has compile problems...)
+B0 +B110 +B115200 +B1200 +B134 +B150 -B153600 +B1800 +B19200 +B200 +B230400 +B2400 +B300 -B307200 +B38400 +B460800 +B4800 +B50 +B57600 +B600 +B75 -B76800 +B9600 +BRKINT +BS0 +BS1 +BSDLY +CBAUD -CBAUDEXT +CBRK -CCTS_OFLOW -CDEL +CDSUSP +CEOF +CEOL -CEOL2 +CEOT +CERASE -CESC +CFLUSH +CIBAUD -CIBAUDEXT +CINTR +CKILL +CLNEXT +CLOCAL -CNSWTCH -CNUL +CQUIT +CR0 +CR1 +CR2 +CR3 +CRDLY +CREAD +CRPRNT +CRTSCTS -CRTSXOFF -CRTS_IFLOW +CS5 +CS6 +CS7 +CS8 +CSIZE +CSTART +CSTOP +CSTOPB +CSUSP -CSWTCH +CWERASE -DEFECHO -DIOC -DIOCGETP -DIOCSETP -DOSMODE +ECHO +ECHOCTL +ECHOE +ECHOK +ECHOKE +ECHONL +ECHOPRT +EXTA +EXTB +FF0 +FF1 +FFDLY -FIORDCHK +FLUSHO +HUPCL +ICANON +ICRNL +IEXTEN +IGNBRK +IGNCR +IGNPAR +IMAXBEL +INLCR +INPCK +ISIG +ISTRIP +IUCLC +IXANY +IXOFF +IXON -KBENABLED -LDCHG -LDCLOSE -LDDMAP -LDEMAP -LDGETT -LDGMAP -LDIOC -LDNMAP -LDOPEN -LDSETT -LDSMAP -LOBLK +NCCS +NL0 +NL1 +NLDLY +NOFLSH +OCRNL +OFDEL +OFILL +OLCUC +ONLCR +ONLRET +ONOCR +OPOST -PAGEOUT +PARENB -PAREXT +PARMRK +PARODD +PENDIN -RCV1EN -RTS_TOG +TAB0 +TAB1 +TAB2 +TAB3 +TABDLY -TCDSET +TCFLSH +TCGETA +TCGETS +TCIFLUSH +TCIOFF +TCIOFLUSH +TCION +TCOFLUSH +TCOOFF +TCOON +TCSADRAIN +TCSAFLUSH +TCSANOW +TCSBRK +TCSETA +TCSETAF +TCSETAW -TCSETCTTY +TCSETS +TCSETSF +TCSETSW +TCXONC -TERM_D40 -TERM_D42 -TERM_H45 -TERM_NONE -TERM_TEC -TERM_TEX -TERM_V10 -TERM_V61 +TIOCCBRK -TIOCCDTR +TIOCCONS +TIOCEXCL -TIOCFLUSH -TIOCGETC +TIOCGETD -TIOCGETP -TIOCGLTC +TIOCGPGRP +TIOCGSID +TIOCGSOFTCAR +TIOCGWINSZ -TIOCHPCL -TIOCKBOF -TIOCKBON -TIOCLBIC -TIOCLBIS -TIOCLGET -TIOCLSET +TIOCMBIC +TIOCMBIS +TIOCMGET +TIOCMSET +TIOCM_CAR +TIOCM_CD +TIOCM_CTS +TIOCM_DSR +TIOCM_DTR +TIOCM_LE +TIOCM_RI +TIOCM_RNG +TIOCM_RTS +TIOCM_SR +TIOCM_ST +TIOCNOTTY +TIOCNXCL +TIOCOUTQ -TIOCREMOTE +TIOCSBRK +TIOCSCTTY -TIOCSDTR -TIOCSETC +TIOCSETD -TIOCSETN -TIOCSETP -TIOCSIGNAL -TIOCSLTC +TIOCSPGRP -TIOCSSID +TIOCSSOFTCAR -TIOCSTART +TIOCSTI -TIOCSTOP +TIOCSWINSZ -TM_ANL -TM_CECHO -TM_CINVIS -TM_LCF -TM_NONE -TM_SET -TM_SNL +TOSTOP -VCEOF -VCEOL +VDISCARD -VDSUSP +VEOF +VEOL +VEOL2 +VERASE +VINTR +VKILL +VLNEXT +VMIN +VQUIT +VREPRINT +VSTART +VSTOP +VSUSP -VSWTCH +VT0 +VT1 +VTDLY +VTIME +VWERASE -WRAP +XCASE -XCLUDE -XMT1EN +XTABS
>>> Configuration looks good! <<<
Writing IO::Tty::Constant.pm...
DEFINE = -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for IO::Tty
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have Test::More 0 ... Yes (1.302183)
Building IO-Tty-1.20
cp Tty.pm blib/lib/IO/Tty.pm
cp Tty/Constant.pm blib/lib/IO/Tty/Constant.pm
cp Pty.pm blib/lib/IO/Pty.pm
Running Mkbootstrap for Tty ()
chmod 644 "Tty.bs"
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Tty.bs blib/arch/auto/IO/Tty/Tty.bs 644
"/usr/bin/perl" "/usr/share/perl5/vendor_perl/ExtUtils/xsubpp" -typemap '/usr/share/perl5/ExtUtils/typemap' Tty.xs > Tty.xsc
mv Tty.xsc Tty.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"1.20\" -DXS_VERSION=\"1.20\" -fPIC "-I/usr/lib64/perl5/CORE" -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT Tty.c
rm -f blib/arch/auto/IO/Tty/Tty.so
gcc -lpthread -shared -Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -L/usr/local/lib -fstack-protector-strong Tty.o -o blib/arch/auto/IO/Tty/Tty.so \
-lutil -lperl \
chmod 755 blib/arch/auto/IO/Tty/Tty.so
Manifying 3 pod documents
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Tty.bs blib/arch/auto/IO/Tty/Tty.bs 644
Manifying 3 pod documents
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /usr/local/lib64/perl5/5.32/auto/IO/Tty/Tty.so
Installing /usr/local/lib64/perl5/5.32/IO/Tty.pm
Installing /usr/local/lib64/perl5/5.32/IO/Pty.pm
Installing /usr/local/lib64/perl5/5.32/IO/Tty/Constant.pm
Installing /usr/local/share/man/man3/IO::Pty.3pm
Installing /usr/local/share/man/man3/IO::Tty.3pm
Installing /usr/local/share/man/man3/IO::Tty::Constant.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed IO-Tty-1.20
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/IO-Tty-1.20/install.json
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/IO-Tty-1.20/MYMETA.json
Searching IO::Tty (1.11) on cpanmetadb ...
Already tried IO-Tty-1.20. Skipping.
Building Expect-1.38
cp lib/Expect.pm blib/lib/Expect.pm
Manifying 1 pod document
Manifying 1 pod document
Installing /usr/local/share/perl5/5.32/Expect.pm
Installing /usr/local/share/man/man3/Expect.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed Expect-1.38
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/Expect-1.38/install.json
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/Expect-1.38/MYMETA.json
Searching HTTP::Tiny () on cpanmetadb ...
--> Working on HTTP::Tiny
Fetching http://www.cpan.org/authors/id/H/HA/HAARG/HTTP-Tiny-0.090.tar.gz
-> OK
Unpacking HTTP-Tiny-0.090.tar.gz
Entering HTTP-Tiny-0.090
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.60)
Configuring HTTP-Tiny-0.090
Running Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for HTTP::Tiny
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have MIME::Base64 0 ... Yes (3.16)
Checking if you have warnings 0 ... Yes (1.47)
Checking if you have Time::Local 0 ... Yes (1.30)
Checking if you have Fcntl 0 ... Yes (1.13)
Checking if you have Carp 0 ... Yes (1.50)
Checking if you have strict 0 ... Yes (1.11)
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.60)
Checking if you have bytes 0 ... Yes (1.07)
Checking if you have IO::Socket 0 ... Yes (1.43)
Checking if you have Socket 0 ... Yes (2.031)
Building HTTP-Tiny-0.090
cp lib/HTTP/Tiny.pm blib/lib/HTTP/Tiny.pm
Manifying 1 pod document
Manifying 1 pod document
Installing /usr/local/share/perl5/5.32/HTTP/Tiny.pm
Installing /usr/local/share/man/man3/HTTP::Tiny.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed HTTP-Tiny-0.090 (upgraded from 0.076)
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/HTTP-Tiny-0.090/install.json
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/HTTP-Tiny-0.090/MYMETA.json
Already tried IO::Tty. Skipping.
Searching JSON::XS () on cpanmetadb ...
--> Working on JSON::XS
Fetching http://www.cpan.org/authors/id/M/ML/MLEHMANN/JSON-XS-4.03.tar.gz
-> OK
Unpacking JSON-XS-4.03.tar.gz
Entering JSON-XS-4.03
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.60)
Checking if you have Canary::Stability 0 ... No
==> Found dependencies: Canary::Stability
Searching Canary::Stability (0) on cpanmetadb ...
--> Working on Canary::Stability
Fetching http://www.cpan.org/authors/id/M/ML/MLEHMANN/Canary-Stability-2013.tar.gz
-> OK
Unpacking Canary-Stability-2013.tar.gz
Entering Canary-Stability-2013
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.60)
Configuring Canary-Stability-2013
Running Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Canary::Stability
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.60)
Building Canary-Stability-2013
cp Stability.pm blib/lib/Canary/Stability.pm
Manifying 1 pod document
Manifying 1 pod document
Installing /usr/local/share/perl5/5.32/Canary/Stability.pm
Installing /usr/local/share/man/man3/Canary::Stability.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed Canary-Stability-2013
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/Canary-Stability-2013/install.json
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/Canary-Stability-2013/MYMETA.json
Configuring JSON-XS-4.03
Running Makefile.PL
***
*** Canary::Stability COMPATIBILITY AND SUPPORT CHECK
*** =================================================
***
*** Hi!
***
*** I do my best to provide predictable and reliable software.
***
*** However, in recent releases, P5P (who maintain perl) have been
*** introducing regressions that are sometimes subtle and at other times
*** catastrophic, often for personal preferences with little or no concern
*** for existing code, most notably CPAN.
***
*** For this reason, it has become very hard for me to maintain the level
*** of reliability and support I have committed myself to in the past, at
*** least with some perl versions: I simply can't keep up working around new
*** bugs or gratituous incompatibilities, and in turn you might suffer from
*** unanticipated problems.
***
*** Therefore I have introduced a support and compatibility check, the results
*** of which follow below, together with a FAQ and some recommendations.
***
*** This check is just to let you know that there might be a risk, so you can
*** make judgement calls on how to proceed - it will not keep the module from
*** installing or working.
***
*** The stability canary says: (nothing, it was driven away by harsh weather)
***
*** It seems you are running perl version 5.032001, likely the "official" or
*** "standard" version. While there is nothing wrong with doing that,
*** standard perl versions 5.022 and up are not supported by JSON::XS.
*** While this might be fatal, it might also be all right - if you run into
*** problems, you might want to downgrade your perl or switch to the
*** stability branch.
***
*** If everything works fine, you can ignore this message.
***
***
*** Stability canary mini-FAQ:
***
*** Do I need to do anything?
*** With luck, no. While some distributions are known to fail
*** already, most should probably work. This message is here
*** to alert you that your perl is not supported by JSON::XS,
*** and if things go wrong, you either need to downgrade, or
*** sidegrade to the stability variant of your perl version,
*** or simply live with the consequences.
***
*** What is this canary thing?
*** It's purpose is to check support status of JSON::XS with
*** respect to your perl version.
***
*** What is this "stability branch"?
*** It's a branch or fork of the official perl, by schmorp, to
*** improve stability and compatibility with existing modules.
***
*** How can I skip this prompt on automated installs?
*** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment.
*** More info is in the Canary::Stability manpage.
***
*** Long version of this FAQ: http://stableperl.schmorp.de/faq.html
*** Stability Branch homepage: http://stableperl.schmorp.de/
***
Continue anyways? [y] y
Warning: prerequisite Types::Serialiser 0 not found.
Warning: prerequisite common::sense 0 not found.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for JSON::XS
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have Types::Serialiser 0 ... No
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.60)
Checking if you have common::sense 0 ... No
==> Found dependencies: Types::Serialiser, common::sense
Searching Types::Serialiser (0) on cpanmetadb ...
--> Working on Types::Serialiser
Fetching http://www.cpan.org/authors/id/M/ML/MLEHMANN/Types-Serialiser-1.01.tar.gz
-> OK
Unpacking Types-Serialiser-1.01.tar.gz
Entering Types-Serialiser-1.01
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.60)
Configuring Types-Serialiser-1.01
Running Makefile.PL
Warning: prerequisite common::sense 0 not found.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Types::Serialiser
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.60)
Checking if you have common::sense 0 ... No
==> Found dependencies: common::sense
Searching common::sense (0) on cpanmetadb ...
--> Working on common::sense
Fetching http://www.cpan.org/authors/id/M/ML/MLEHMANN/common-sense-3.75.tar.gz
-> OK
Unpacking common-sense-3.75.tar.gz
Entering common-sense-3.75
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.60)
Configuring common-sense-3.75
Running Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for common::sense
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.60)
Building common-sense-3.75
"/usr/bin/perl" sense.pm.PL sense.pm
cp sense.pm blib/arch/common/sense.pm
cp sense.pod blib/lib/common/sense.pod
Manifying 2 pod documents
Manifying 2 pod documents
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /usr/local/lib64/perl5/5.32/common/sense.pm
Installing /usr/local/lib64/perl5/5.32/common/sense.pod
Installing /usr/local/share/man/man3/common::sense.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed common-sense-3.75
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/common-sense-3.75/install.json
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/common-sense-3.75/MYMETA.json
Building Types-Serialiser-1.01
cp Serialiser/Error.pm blib/lib/Types/Serialiser/Error.pm
cp Serialiser.pm blib/lib/Types/Serialiser.pm
Manifying 2 pod documents
Manifying 2 pod documents
Installing /usr/local/share/perl5/5.32/Types/Serialiser.pm
Installing /usr/local/share/perl5/5.32/Types/Serialiser/Error.pm
Installing /usr/local/share/man/man3/Types::Serialiser.3pm
Installing /usr/local/share/man/man3/Types::Serialiser::Error.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed Types-Serialiser-1.01
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/Types-Serialiser-1.01/install.json
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/Types-Serialiser-1.01/MYMETA.json
Already tried common::sense. Skipping.
Building JSON-XS-4.03
cp XS/Boolean.pm blib/lib/JSON/XS/Boolean.pm
cp XS.pm blib/lib/JSON/XS.pm
Running Mkbootstrap for XS ()
chmod 644 "XS.bs"
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- XS.bs blib/arch/auto/JSON/XS/XS.bs 644
"/usr/bin/perl" "/usr/share/perl5/vendor_perl/ExtUtils/xsubpp" -typemap '/usr/share/perl5/ExtUtils/typemap' -typemap '/root/.cpanm/work/1752651929.61455/JSON-XS-4.03/typemap' XS.xs > XS.xsc
mv XS.xsc XS.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"4.03\" -DXS_VERSION=\"4.03\" -fPIC "-I/usr/lib64/perl5/CORE" XS.c
XS.xs: In function ‘decode_utf8’:
XS.xs:207:5: warning: ‘Perl_utf8n_to_uvuni’ is deprecated [-Wdeprecated-declarations]
207 | return utf8n_to_uvuni (s, len, clen, UTF8_CHECK_ONLY);
| ^~~~~~
In file included from /usr/lib64/perl5/CORE/perl.h:5567,
from XS.xs:2:
/usr/lib64/perl5/CORE/proto.h:3993:25: note: declared here
3993 | PERL_CALLCONV UV Perl_utf8n_to_uvuni(pTHX_ const U8 *s, STRLEN curlen, STRLEN *retlen, U32 flags)
| ^~~~~~~~~~~~~~~~~~~
In file included from /usr/lib64/perl5/CORE/perl.h:5606,
from XS.xs:2:
XS.xs: In function ‘ptr_to_index’:
XS.xs:239:27: warning: pointer targets in passing argument 2 of ‘Perl_utf8_distance’ differ in signedness [-Wpointer-sign]
239 | ? utf8_distance (offset, SvPVX (sv))
| ^~~~~~
| |
| char *
/usr/lib64/perl5/CORE/embed.h:720:58: note: in definition of macro ‘utf8_distance’
720 | #define utf8_distance(a,b) Perl_utf8_distance(aTHX_ a,b)
| ^
In file included from /usr/lib64/perl5/CORE/perl.h:6161,
from XS.xs:2:
/usr/lib64/perl5/CORE/inline.h:1487:36: note: expected ‘const U8 *’ {aka ‘const unsigned char *’} but argument is of type ‘char *’
1487 | Perl_utf8_distance(pTHX_ const U8 *a, const U8 *b)
| ~~~~~~~~~~^
In file included from /usr/lib64/perl5/CORE/perl.h:5606,
from XS.xs:2:
/usr/lib64/perl5/CORE/sv.h:1260:34: warning: pointer targets in passing argument 3 of ‘Perl_utf8_distance’ differ in signedness [-Wpointer-sign]
1260 | # define SvPVX(sv) ((sv)->sv_u.svu_pv)
| ~~~~~~~~~~~^~~~~~~~
| |
| char *
/usr/lib64/perl5/CORE/embed.h:720:60: note: in definition of macro ‘utf8_distance’
720 | #define utf8_distance(a,b) Perl_utf8_distance(aTHX_ a,b)
| ^
XS.xs:239:35: note: in expansion of macro ‘SvPVX’
239 | ? utf8_distance (offset, SvPVX (sv))
| ^~~~~
In file included from /usr/lib64/perl5/CORE/perl.h:6161,
from XS.xs:2:
/usr/lib64/perl5/CORE/inline.h:1487:49: note: expected ‘const U8 *’ {aka ‘const unsigned char *’} but argument is of type ‘char *’
1487 | Perl_utf8_distance(pTHX_ const U8 *a, const U8 *b)
| ~~~~~~~~~~^
XS.xs: In function ‘ref_bool_type’:
XS.xs:350:10: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wdangling-else]
350 | if (len == 1)
| ^
XS.xs: In function ‘encode_str’:
XS.xs:461:42: warning: pointer targets in passing argument 1 of ‘decode_utf8’ differ in signedness [-Wpointer-sign]
461 | uch = decode_utf8 (str, end - str, &clen);
| ^~~
| |
| char *
XS.xs:197:29: note: expected ‘unsigned char *’ but argument is of type ‘char *’
197 | decode_utf8 (unsigned char *s, STRLEN len, STRLEN *clen)
| ~~~~~~~~~~~~~~~^
XS.xs:514:50: warning: pointer targets in passing argument 1 of ‘encode_utf8’ differ in signedness [-Wpointer-sign]
514 | enc->cur = encode_utf8 (enc->cur, uch);
| ~~~^~~~~
| |
| char *
XS.xs:214:29: note: expected ‘unsigned char *’ but argument is of type ‘char *’
214 | encode_utf8 (unsigned char *s, UV ch)
| ~~~~~~~~~~~~~~~^
XS.xs:514:32: warning: pointer targets in assignment from ‘unsigned char *’ to ‘char *’ differ in signedness [-Wpointer-sign]
514 | enc->cur = encode_utf8 (enc->cur, uch);
| ^
XS.xs: In function ‘decode_str’:
XS.xs:1132:26: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wdangling-else]
1132 | if (hi >= 0xd800)
| ^
XS.xs:1158:46: warning: pointer targets in passing argument 1 of ‘encode_utf8’ differ in signedness [-Wpointer-sign]
1158 | cur = encode_utf8 (cur, hi);
| ^~~
| |
| char *
XS.xs:214:29: note: expected ‘unsigned char *’ but argument is of type ‘char *’
214 | encode_utf8 (unsigned char *s, UV ch)
| ~~~~~~~~~~~~~~~^
XS.xs:1158:31: warning: pointer targets in assignment from ‘unsigned char *’ to ‘char *’ differ in signedness [-Wpointer-sign]
1158 | cur = encode_utf8 (cur, hi);
| ^
XS.xs:1178:28: warning: pointer targets in passing argument 1 of ‘decode_utf8’ differ in signedness [-Wpointer-sign]
1178 | decode_utf8 (dec_cur, dec->end - dec_cur, &clen);
| ^~~~~~~
| |
| char *
XS.xs:197:29: note: expected ‘unsigned char *’ but argument is of type ‘char *’
197 | decode_utf8 (unsigned char *s, STRLEN len, STRLEN *clen)
| ~~~~~~~~~~~~~~~^
XS.xs: In function ‘decode_num’:
XS.xs:1331:12: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wdangling-else]
1331 | if (numtype & IS_NUMBER_IN_UV)
| ^
In file included from /usr/lib64/perl5/CORE/perl.h:5606,
from XS.xs:2:
XS.xs: In function ‘decode_json’:
XS.xs:1825:31: warning: pointer targets in passing argument 3 of ‘Perl_pv_uni_display’ differ in signedness [-Wpointer-sign]
1825 | pv_uni_display (uni, dec.cur, dec.end - dec.cur, 20, UNI_DISPLAY_QQ);
| ~~~^~~~
| |
| char *
/usr/lib64/perl5/CORE/embed.h:454:69: note: in definition of macro ‘pv_uni_display’
454 | #define pv_uni_display(a,b,c,d,e) Perl_pv_uni_display(aTHX_ a,b,c,d,e)
| ^
In file included from /usr/lib64/perl5/CORE/perl.h:5567,
from XS.xs:2:
/usr/lib64/perl5/CORE/proto.h:2771:70: note: expected ‘const U8 *’ {aka ‘const unsigned char *’} but argument is of type ‘char *’
2771 | PERL_CALLCONV char* Perl_pv_uni_display(pTHX_ SV *dsv, const U8 *spv, STRLEN len, STRLEN pvlim, UV flags);
| ~~~~~~~~~~^~~
XS.xs: In function ‘incr_parse’:
XS.xs:1963:26: warning: multi-line comment [-Wcomment]
1963 | ++p; // "virtually" consumes character after \
| ^
XS.xs:2042:7: warning: label ‘modechange’ defined but not used [-Wunused-label]
2042 | modechange:
| ^~~~~~~~~~
XS.xs: In function ‘XS_JSON__XS_incr_parse’:
XS.xs:2245:12: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wdangling-else]
2245 | if (!DECODE_WANTS_OCTETS (self) == !SvUTF8 (self->incr_text))
| ^
XS.xs:2267:16: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wdangling-else]
2267 | if (SvUTF8 (jsonstr) != SvUTF8 (self->incr_text))
| ^
In file included from /usr/lib64/perl5/CORE/perl.h:28,
from XS.xs:2:
XS.xs: In function ‘encode_sv’:
/usr/lib64/perl5/CORE/config.h:909:27: warning: ignoring return value of ‘gcvt’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
909 | #define Gconvert(x,n,t,b) gcvt((x),(n),(b))
| ^~~~~~~~~~~~~~~~~
XS.xs:910:7: note: in expansion of macro ‘Gconvert’
910 | Gconvert (SvNVX (sv), NV_DIG, 0, enc->cur);
| ^~~~~~~~
rm -f blib/arch/auto/JSON/XS/XS.so
gcc -lpthread -shared -Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -L/usr/local/lib -fstack-protector-strong XS.o -o blib/arch/auto/JSON/XS/XS.so \
-lperl \
chmod 755 blib/arch/auto/JSON/XS/XS.so
cp bin/json_xs blib/script/json_xs
"/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/json_xs
Manifying 1 pod document
Manifying 2 pod documents
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- XS.bs blib/arch/auto/JSON/XS/XS.bs 644
Manifying 1 pod document
Manifying 2 pod documents
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /usr/local/lib64/perl5/5.32/auto/JSON/XS/XS.so
Installing /usr/local/lib64/perl5/5.32/JSON/XS.pm
Installing /usr/local/lib64/perl5/5.32/JSON/XS/Boolean.pm
Installing /usr/local/share/man/man1/json_xs.1
Installing /usr/local/share/man/man3/JSON::XS.3pm
Installing /usr/local/share/man/man3/JSON::XS::Boolean.3pm
Installing /usr/local/bin/json_xs
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed JSON-XS-4.03
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/JSON-XS-4.03/install.json
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/JSON-XS-4.03/MYMETA.json
Searching local::lib () on cpanmetadb ...
--> Working on local::lib
Fetching http://www.cpan.org/authors/id/H/HA/HAARG/local-lib-2.000029.tar.gz
-> OK
Unpacking local-lib-2.000029.tar.gz
Entering local-lib-2.000029
Checking configure dependencies from META.json
Configuring local-lib-2.000029
Running Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for local::lib
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Building local-lib-2.000029
cp lib/POD2/PT_BR/local/lib.pod blib/lib/POD2/PT_BR/local/lib.pod
cp lib/POD2/DE/local/lib.pod blib/lib/POD2/DE/local/lib.pod
cp lib/lib/core/only.pm blib/lib/lib/core/only.pm
cp lib/local/lib.pm blib/lib/local/lib.pm
Manifying 4 pod documents
Manifying 4 pod documents
Installing /usr/local/share/perl5/5.32/local/lib.pm
Installing /usr/local/share/perl5/5.32/POD2/PT_BR/local/lib.pod
Installing /usr/local/share/perl5/5.32/POD2/DE/local/lib.pod
Installing /usr/local/share/perl5/5.32/lib/core/only.pm
Installing /usr/local/share/man/man3/POD2::DE::local::lib.3pm
Installing /usr/local/share/man/man3/POD2::PT_BR::local::lib.3pm
Installing /usr/local/share/man/man3/lib::core::only.3pm
Installing /usr/local/share/man/man3/local::lib.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed local-lib-2.000029 (upgraded from 2.000024)
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/local-lib-2.000029/install.json
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/local-lib-2.000029/MYMETA.json
Searching Try::Tiny () on cpanmetadb ...
--> Working on Try::Tiny
Fetching http://www.cpan.org/authors/id/E/ET/ETHER/Try-Tiny-0.32.tar.gz
-> OK
Unpacking Try-Tiny-0.32.tar.gz
Entering Try-Tiny-0.32
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.60)
Configuring Try-Tiny-0.32
Running Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Try::Tiny
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have Exporter 5.57 ... Yes (5.74)
Checking if you have constant 0 ... Yes (1.33)
Checking if you have strict 0 ... Yes (1.11)
Checking if you have Carp 0 ... Yes (1.50)
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.60)
Checking if you have warnings 0 ... Yes (1.47)
Building Try-Tiny-0.32
cp lib/Try/Tiny.pm blib/lib/Try/Tiny.pm
Manifying 1 pod document
Manifying 1 pod document
Installing /usr/local/share/perl5/5.32/Try/Tiny.pm
Installing /usr/local/share/man/man3/Try::Tiny.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed Try-Tiny-0.32
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/Try-Tiny-0.32/install.json
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/Try-Tiny-0.32/MYMETA.json
Searching version () on cpanmetadb ...
--> Working on version
Fetching http://www.cpan.org/authors/id/L/LE/LEONT/version-0.9933.tar.gz
-> OK
Unpacking version-0.9933.tar.gz
Entering version-0.9933
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.60)
Configuring version-0.9933
Running Makefile.PL
Testing if you have a C compiler
Checking if your kit is complete...
Looks good
Writing MYMETA.yml and MYMETA.json
Generating a Unix-style Makefile
Writing Makefile for version
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.60)
Building version-0.9933
cp lib/version/regex.pm blib/lib/version/regex.pm
cp lib/version.pm blib/lib/version.pm
cp lib/version.pod blib/lib/version.pod
cp vperl/vpp.pm blib/lib/version/vpp.pm
cp lib/version/Internals.pod blib/lib/version/Internals.pod
make[1]: Entering directory '/root/.cpanm/work/1752651929.61455/version-0.9933/vutil'
cp lib/version/vxs.pm ../blib/lib/version/vxs.pm
Running Mkbootstrap for vxs ()
chmod 644 "vxs.bs"
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- vxs.bs ../blib/arch/auto/version/vxs/vxs.bs 644
"/usr/bin/perl" "/usr/share/perl5/vendor_perl/ExtUtils/xsubpp" -typemap '/usr/share/perl5/ExtUtils/typemap' vxs.xs > vxs.xsc
mv vxs.xsc vxs.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"0.9933\" -DXS_VERSION=\"0.9933\" -fPIC "-I/usr/lib64/perl5/CORE" vxs.c
rm -f ../blib/arch/auto/version/vxs/vxs.so
gcc -lpthread -shared -Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -L/usr/local/lib -fstack-protector-strong vxs.o -o ../blib/arch/auto/version/vxs/vxs.so \
-lperl \
chmod 755 ../blib/arch/auto/version/vxs/vxs.so
make[1]: Leaving directory '/root/.cpanm/work/1752651929.61455/version-0.9933/vutil'
Manifying 2 pod documents
make[1]: Entering directory '/root/.cpanm/work/1752651929.61455/version-0.9933/vutil'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- vxs.bs ../blib/arch/auto/version/vxs/vxs.bs 644
make[1]: Leaving directory '/root/.cpanm/work/1752651929.61455/version-0.9933/vutil'
Manifying 2 pod documents
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /usr/local/lib64/perl5/5.32/auto/version/vxs/vxs.so
Installing /usr/local/lib64/perl5/5.32/version.pm
Installing /usr/local/lib64/perl5/5.32/version.pod
Installing /usr/local/lib64/perl5/5.32/version/regex.pm
Installing /usr/local/lib64/perl5/5.32/version/vpp.pm
Installing /usr/local/lib64/perl5/5.32/version/Internals.pod
Installing /usr/local/lib64/perl5/5.32/version/vxs.pm
Installing /usr/local/share/man/man3/version.3pm
Installing /usr/local/share/man/man3/version::Internals.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed version-0.9933 (upgraded from 0.9928)
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/version-0.9933/install.json
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/version-0.9933/MYMETA.json
Searching YAML::Syck () on cpanmetadb ...
--> Working on YAML::Syck
Fetching http://www.cpan.org/authors/id/T/TO/TODDR/YAML-Syck-1.34.tar.gz
-> OK
Unpacking YAML-Syck-1.34.tar.gz
Entering YAML-Syck-1.34
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.60)
Configuring YAML-Syck-1.34
Running Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for YAML::Syck
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have Test::More 0 ... Yes (1.302183)
Building YAML-Syck-1.34
cp lib/YAML/Dumper/Syck.pm blib/lib/YAML/Dumper/Syck.pm
cp lib/JSON/Syck.pm blib/lib/JSON/Syck.pm
cp lib/YAML/Loader/Syck.pm blib/lib/YAML/Loader/Syck.pm
cp lib/YAML/Syck.pm blib/lib/YAML/Syck.pm
Running Mkbootstrap for Syck ()
chmod 644 "Syck.bs"
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Syck.bs blib/arch/auto/YAML/Syck/Syck.bs 644
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" bytecode.c
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" emitter.c
emitter.c: In function ‘syck_emitter_escape’:
emitter.c:835:40: warning: pointer targets in passing argument 2 of ‘syck_emitter_write’ differ in signedness [-Wpointer-sign]
835 | syck_emitter_write( e, src + i, 1 );
| ~~~~^~~
| |
| unsigned char *
emitter.c:290:49: note: expected ‘const char *’ but argument is of type ‘unsigned char *’
290 | syck_emitter_write( SyckEmitter *e, const char *str, long len )
| ~~~~~~~~~~~~^~~
emitter.c: In function ‘syck_emit_1quoted’:
emitter.c:847:10: warning: unused variable ‘do_indent’ [-Wunused-variable]
847 | char do_indent = 0;
| ^~~~~~~~~
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" gram.c
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" handler.c
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" implicit.c
In file included from implicit.re:10:
implicit.re: In function ‘try_tag_implicit’:
syck.h:70:19: warning: macro expands to multiple statements [-Wmultistatement-macros]
70 | #define S_FREE(n) free(n); n = NULL;
| ^~~~
implicit.re:36:31: note: in expansion of macro ‘S_FREE’
implicit.re:36:5: note: some parts of macro expansion are not guarded by this ‘if’ clause
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" node.c
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" syck_.c
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" syck_st.c
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" token.c
token.re: In function ‘sycklex_yaml_utf8’:
token.re:544:36: warning: variable ‘lvl’ set but not used [-Wunused-but-set-variable]
"/usr/bin/perl" "/usr/share/perl5/vendor_perl/ExtUtils/xsubpp" -typemap '/usr/share/perl5/ExtUtils/typemap' Syck.xs > Syck.xsc
mv Syck.xsc Syck.c
gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"1.34\" -DXS_VERSION=\"1.34\" -fPIC "-I/usr/lib64/perl5/CORE" Syck.c
In file included from Syck.xs:5:
perl_syck.h: In function ‘json_syck_mark_emitter’:
perl_syck.h:837:5: warning: enumeration value ‘SVt_NULL’ not handled in switch [-Wswitch]
837 | switch (SvTYPE(sv)) {
| ^~~~~~
perl_syck.h:837:5: warning: enumeration value ‘SVt_IV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_NV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_INVLIST’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVIV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVNV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVMG’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_REGEXP’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVGV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVLV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVCV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVFM’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVIO’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_LAST’ not handled in switch [-Wswitch]
In file included from Syck.xs:8:
perl_syck.h: In function ‘yaml_syck_mark_emitter’:
perl_syck.h:837:5: warning: enumeration value ‘SVt_NULL’ not handled in switch [-Wswitch]
837 | switch (SvTYPE(sv)) {
| ^~~~~~
perl_syck.h:837:5: warning: enumeration value ‘SVt_IV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_NV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_INVLIST’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVIV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVNV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVMG’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_REGEXP’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVGV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVLV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVCV’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVFM’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_PVIO’ not handled in switch [-Wswitch]
perl_syck.h:837:5: warning: enumeration value ‘SVt_LAST’ not handled in switch [-Wswitch]
perl_syck.h: In function ‘yaml_syck_emitter_handler’:
perl_syck.h:909:9: warning: enumeration value ‘SVt_NULL’ not handled in switch [-Wswitch]
909 | switch (SvTYPE(SvRV(sv))) {
| ^~~~~~
perl_syck.h:909:9: warning: enumeration value ‘SVt_IV’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_NV’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_PV’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_INVLIST’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_PVIV’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_PVNV’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_PVLV’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_PVFM’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_PVIO’ not handled in switch [-Wswitch]
perl_syck.h:909:9: warning: enumeration value ‘SVt_LAST’ not handled in switch [-Wswitch]
rm -f blib/arch/auto/YAML/Syck/Syck.so
gcc -lpthread -shared -Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -L/usr/local/lib -fstack-protector-strong bytecode.o emitter.o gram.o handler.o implicit.o node.o syck_.o syck_st.o token.o Syck.o -o blib/arch/auto/YAML/Syck/Syck.so \
-lperl \
lto-wrapper: warning: using serial compilation of 2 LTRANS jobs
chmod 755 blib/arch/auto/YAML/Syck/Syck.so
Manifying 2 pod documents
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Syck.bs blib/arch/auto/YAML/Syck/Syck.bs 644
Manifying 2 pod documents
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /usr/local/lib64/perl5/5.32/auto/YAML/Syck/Syck.so
Installing /usr/local/lib64/perl5/5.32/YAML/Syck.pm
Installing /usr/local/lib64/perl5/5.32/YAML/Dumper/Syck.pm
Installing /usr/local/lib64/perl5/5.32/YAML/Loader/Syck.pm
Installing /usr/local/lib64/perl5/5.32/JSON/Syck.pm
Installing /usr/local/share/man/man3/JSON::Syck.3pm
Installing /usr/local/share/man/man3/YAML::Syck.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
-> OK
Successfully installed YAML-Syck-1.34
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/YAML-Syck-1.34/install.json
Installing /usr/local/share/perl5/5.32/x86_64-linux-thread-multi/.meta/YAML-Syck-1.34/MYMETA.json
14 distributions installed